1、A collet and replacement of cutting tools,screw nut and body must be clean,and add grease,Otherwise it will cause damage to the thread.2、The device must be placed when the collet nut,and then into the tool,then the lock body.
1、A collet and replacement of cutting tools,screw nut and body must be clean,and add grease,Otherwise it will cause damage to the thread.2、The device must be placed when the collet nut,and then into the tool,then the lock body.
1、Runout:standard and 100mm 0.003mm 160mm 0.005mm2、Cooling:AD;AD/B can be made by request.3、Balancing:G6.3/15000RPMBalancing G2.5 can be made by request.4、Usage:for clamping tools with straight shank in collets DIN 6499
● A collet and replacement of cutting tools,screw nut and body must be clean,and add grease,Otherwise it will cause damage to the thread.● The device must be placed when the collet nut,and then into the tool,then the lock body.● The placement tool collet hole,clamping collet must exceed effective
● A collet and replacement of cutting tools,screw nut and body must be clean,and add grease,Otherwise it will cause damage to the thread.● The device must be placed when the collet nut,and then into the tool,then the lock body.● The placement tool collet hole,clamping collet must exceed effective
● A collet and replacement of cutting tools, screw nut, and body must be clean, and add grease, Otherwise, it will cause damage to the thread.● The device must be placed when the collet nut, and then into the tool, then the lock body.● The placement tool collet hole, clamping collet must exceed e
● The design uses 4 Deg collet clamp unilateral, high precision repeat loading.● All-round nut design, low noise, small wind resistance, suitable for high speed.
● Collet nut design-no pull, strong stability, and high rigidity.● The recommended torque wrench, Dose not exceed the recommended value of 30%, with high torque, the deformation may lead.